Thermography System VarioCAM
®
HD
1. Introduction
4 © InfraTec GmbH 2016 User Manual
1 Introduction
Dear user,
we would like to congratulate you on purchasing your new VarioCAM
®
HD thermography system.
Please carefully read this user manual before initial start-up. This is the only way to ensure that you are
able to fully take advantage of the performance capability of your thermography system. Please
particularly observe the notes on device safety in accordance with chapter 2 in order to avoid damages to
the thermography system.
All information provided within the framework of this user manual describe a completely equipped
VarioCAM
®
HD thermography system of the “research” series. Depending on the selected model and the
individual customisation, technical data, scope of functions and supplied accessories of your
thermography system may deviate from the version described herein. Equipment-dependent features are
identified accordingly by means of an * within this user manual.
As a matter of principle, the descriptions of the technical data and the specific scopes of functions and
delivery in the corresponding shipping documents are decisive (order confirmation/bill of delivery).
This product is subject to further developments within the meaning of technical progress.
Jenoptik ESW GmbH
07745 Jena / GERMANY
InfraTec GmbH
01217 Dresden / GERMANY
Phone: +49 351 871-8615
Fax: +49 351 871-8727
Email: service@InfraTec.de
Note:
Without the written consent of Jenoptik and InfraTec GmbH, no part of this user manual must be
reproduced or edited, copied or distributed using electronic systems in any form (print, copy, microfilm or
any other procedure). This user manual was developed applying due diligence. No liability shall be
assumed for any damages caused by the non-observance of the information contained in this user
manual.
All mentioned product names and trademarks shall remain the property of their respective owners.
To Next Page
Loading...