User Manual for the Thermographic System VarioCAM
®
high resolution
10. Operating Software IRBIS® remote 3.0*
80 © InfraTec GmbH 2013 User Manual
Please note that the IRBIS
®
remote software programme does not install any video compressing tools (video
codecs) in the computer. In the selection box, you can find video codecs already located in the Operating
System. Parameterisation possibilities are required by the respective codec and may vary.
The quality of the AVI file strongly depends on the selected video codec and the rate of compression.
Languages
Fig. 169 Language settings
The IRBIS
®
remote software supports the languages “German” and “English”.
The boxes “MMX” (Multi Media Extension), “3Dnow!”, “SSE” (Steaming SIMD Extensions) and “SSE2”
are read out by the programme and hint at available extensions of sets of commands which are of
importance for data export.
10.2.4 Data Transfer
The dialogue shown in Fig. 170 is used for the transfer of the data saved on the SD card in the infrared
camera VarioCAM
®
hr.
Fig. 170 Dialogue for data transfer
To Next Page
Loading...
