Ingenico Lane3000 - Merchant Card Functionality; Payment Card Usage Methods

User Guide Payment terminals | 11
Merchant Card
Kjøpmannskort
Købmandskort
Kauppiaskortti
Lösenkort
2. Merchant card
A Merchant Card is delivered with the terminal. The Merchant Card is used to activate individual terminal functions.
The Merchant Card is used to activate the following functions in the payment terminal:
• Cancel the most recent transaction
• Reconciliation (if protected)
• Terminal status printout
• Offline transactions printout
• Administration of operator ID
• Changes to terminal parameters
• Manual updating of terminal software
If you do not have a Merchant Card or if you have a defective card,
you can order a new one from Nets’ customer service.
NB: The Merchant Card makes it possible to cancel transactions performed on the terminal. Make sure the
Merchant Card is kept in a safe place.
3. Using payment cards
With chip
Insert the card in the front of the
terminal with the chip facing up:
With magnetic strip
Swipe the card with the magnetic
strip facing left:
NB: If contactless is activated, press
F2 (down arrow) to activate the mag-
netic strip reader.
Contactless (NFC)
Hold the card or mobile phone over
the terminal’s display until the trans-
action has been completed: