Ingenico Lane3000 - Copy of Last Z-Total; Operator X-Total

User Guide Payment terminals | 37
14.4 Copy of last Z-Total
This function is used to extract a copy of the most recent Z-Total.
Press MENU.
Main menu
3 Card services
4 Optional Func
5 Copy menu
Press numeric key 5
or scroll down to Copy menu and press OK.
Copy menu
1 Last receipt
2 Last reconc.
3 Last Z-Total
Press numeric key 3
or scroll down to Last Z-Total and press OK.
Print Pending Wait for copy.
14.5 Operator X-Total
The report shows all transactions carried out on the terminal for one or all operators since the last Operator Z-Total was
printed out. Figures are not reset when a list is printed out.
Press MENU.
Main menu
5 Copy menu
6 Reconciliation
7 Operator menu
Press numeric key 7
or scroll down to Operator menu and press OK.
Operator menu
1 Reports
2 Issuers
3 Term status
Press OK for Reports.
Reports
2 X-Total
3 Z-Total
4 Op X-Total
Press numeric key 4
or scroll down to Operator X-Total and press OK.
Op X-Total
1 Cur operator
2 All
Press OK to print out X-Total for a selected operator.
Press 2 to print out X-Total for all operators.
Print Pending Wait for report.