Ingenico Lane3000 - Delete Operator

40 | User Guide Payment terminals
15.2 Delete operator
Used to delete a registered operator.
Swipe the Merchant Card, magnetic strip facing left.
Merchant menu
1 Issuers
2 EOT
3 Operator admin
Press numeric key 3
or scroll down to Operator admin.
Operator admin
1 Add Op.
2 Delete Op.
3 Print ops.
Press numeric key 2 or scroll down to Delete Operator and press OK.
PIN + OK
Appears only if the registered operator has a PIN. Only the Master Operator
can delete operators.
Operator ID: Enter the operator number that is to be deleted and press OK.
Delete
Operator?
Press OK to confirm deletion of operator.
Operator deleted