Ingenico Lane3000 - Manual Card Data Entry for Purchases

User Guide Payment terminals | 21
9.3 Purchase with manual entry of card data
This function can be used to purchase and return goods. Enter card data on the terminal instead of the cardholder using
his/her card. This feature is only available for credit cards with signature check.
Press MENU.
Main menu
1 Purchase
2 Purchase + C/B
3 Card services
Press OK for Purchase.
Amount + OK
100.00
Enter amount of purchase and press OK.
NOK = 100.00
Awaiting card
Press the F4 key (the key at the top right of the terminal).
Enter card no.:
Enter the cardholder’s card number (from the front of the cardholder’s card)
and press OK.
Expiry date:
/
Enter card expiry date mm/yy and press OK.
Enter CVC:
Enter the card’s CVC number and press OK. CVC is the last three digits of the
number that can be found on the back of the card next to the cardholder’s
signature.
Amount = 100.00
OK or STOP
The amount is verified by pressing OK.
Cancel the transaction by pressing STOP.
APPROVED
If the amount is authorised, the terminal display will show APPROVED and
print a receipt.