Ingenico Lane3000 - Terminal Parameters Configuration

44 | User Guide Payment terminals
18. Terminal parameters
1 Function Terminal ID
Amount mode Øre/Kroner
Backup solution (EOT) Yes/No
Service first Yes/No
Information field No information/CID/information text/Oper ID
Sound None/On Error/Always
Always copy No/Yes
Duplicate check Yes/No
Language Norwegian/ Swedish/ Danish/ English/ Finnish/ German/
Hungarian/ Estonian/ Polish/ Dutch
Tips Total amount > Yes/No
Change operator Disable/After Reconc/After Z-Total/Always/After 0-Report
VAT Fixed rate/Change rate/No VAT
VAT rate
Sleep mode Auto/Always (Will not be visible if ECR is switched on)
Power off modus Never/After 1 hour/After 2 hours
Fallback language Norwegian/ Swedish/ Danish / English/ Finnish / German/
Hungarian/ Estonian/ Polish / Dutch /Spanish / French
Backlight Auto/Always
Chip direction Chip up/ Chip towards you/Chip down
Customer receipt Always/On demand
IFR priority Domestic/None/International
2 Communication Comm. type = GPRS/Ethernet/via ECR
Host IP Address 193.214.20.211 / 91.102.24.142
Host IP Port 9670
GPRS APN nets
GSM PIN ****
DHCP Use DHCP/Static
3 ECR ECR Yes/No
Comm. type RS232 / USB Slave / IP Ethernet
Card info Never / After amount / Always
Header/Footer Yes/No
4 Security Protect menu Yes/No
Protect reconciliation Yes/No
Protect reversal Yes/No
6 Change profile 1 .no
2 .se
3 .dk
4 .fi
5 .de
6 hu
7 .et
8 .pl
9 nl