User Guide Payment terminals | 39
15. Operators
This function is used to register and delete operators using the termin al. Operators are registered with a unique opera-
tor ID (up to 10 digits) and name. Each operator must be registered on each terminal that they use.
It is possible to access-protect operators by activating a four-digit code. The first operator to register with his/her code
becomes the Master. The Master Operator is the only person who can create or delete registered operators. If the Mas-
ter Operator is not known, a list of registered operators can be printed out. The Master is marked with an *.
15.1 Creating a new operator
Used for registering a new operator on the terminal.
Swipe the Merchant Card, magnetic strip facing left.
Merchant menu
1 Issuers
2 EOT
3 Operator admin
Press numeric key 3
or scroll down to Operator admin.
Operator admin
1 Add Op.
2 Delete Op.
3 Print ops.
Press OK to register a new operator.
Operator Id: Enter operator number and press OK.
Operator Name:
ABC
Enter operator name. Use the F4 key (the key at the top right of the terminal)
to toggle to lower case.
Operator PIN:
Enter the optional four-digit PIN and press OK. If a PIN is not required, the
field may be left empty. Simply press OK.
Operator added
To Next Page
Loading...
