6 | User Guide Payment terminals
Open the cable cover by pressing the clips upwards.
Lift the cover in the direction of the arrow.
When the cover has been removed, connect the terminal
power cable (1) and Ethernet cable (2).
To close the cover again replace the top part, first
ensuring that the cover clips are in place on the terminal.
Then press the cover down towards the back of the
terminal.
1.3 Installing iCT250E
Installing iCT250E with broadband communication
In order to connect an iCT250E to the power supply and broadband communication, do as follows:
The terminal must be turned off when connecting the Ethernet cable.
!
To Next Page
Loading...
