Ingenico Lane3000 - X-Total; Z-Total

36 | User Guide Payment terminals
14.2 X-Total
X-total is a report that shows the accumulated sales performed on the terminal since previous Z-total was printed. The
stored figures are not reset when a X-Total is printed.
Press MENU.
Main menu
5 Copy menu
6 Reconciliation
7 Operator menu
Press numeric key 7
or scroll down to Operator Menu and press OK.
Operator menu
1 Reports
2 Issuers
3 Term status
Press OK for Reports.
Reports
1 Trans. list
2 X-Total
3 Z-Total
Press numeric key 2
or scroll down to X-Total and press OK.
Print Pending Wait for report.
14.3 Z-Total
Z-total is a report that shows the accumulated sales performed on the terminal since previous Z-total was printed. The
stored figures are reset when a Z-Total is printed.
Press MENU.
Main menu
5 Copy menu
6 Reconciliation
7 Operator menu
Press numeric key 7
or scroll down to Operator Menu and press OK.
Operator menu
1 Reports
2 Issuers
3 Term status
Press OK for Reports.
Reports
1 Trans. list
2 X-Total
3 Z-Total
Press numeric key 2
or scroll down to X-Total and press OK.
Print Pending Wait for report.