8 | User Guide Payment terminals
1.4 Installing iPP350/Lane3000
iPP350/Lane3000 are integrated with an ECR system using an integration cable. This is either a USB cable or an
RS232 cable. The USB cable must be connected to the ECR system’s USB port, the RS232 cable must be connected to
the ECR system’s COM port. Both variants must be connected to iPP350/Lane3000 as follows:
Insert the integration cable as shown in the image.
Download USB drivers
USB drivers for integration with an ECR system can be downloaded from:
https://shop.nets.eu/nb/web/no/usb-driver-til-terminaler
Installing iPP350/Lane3000 with “Magic Box”
Magic Box is used when iPP350/Lane3000 must be connected directly to the Ethernet (broadband). The Magic Box
cable must be connected to the payment terminal as follows:
Insert the integration cable as shown in the image.
To Next Page
Loading...
