InHand VG710 - Page 10

InHand VG710 InVehicle Gateway User Manual
5
− Telnet is disabled.
− SSH is disabled.
− Access from the cellular network is allowed only over HTTPS.
7
User name and
password
− adm/123456 (super administrator)
8
Power
management
− shutdown-delay 30: The power-off delay is 30s.
− standby-mode 1: The power-off function is enabled.
− standby-check-interval 20 indicates the power check interval in
standby mode.
− standby-voltage 90: The standby threshold voltage is 9 V.
− standby-resume-
voltage 105: The threshold voltage for resuming
normal operating in standby mode is 10.5 V.
9 IO
−
Four digital output channels generate output at low level by
default, and the pull-up resistor is disabled.
− The pull-up resistor for six digital input channels is disabled.
10 Serial port
− RS232
Baud rate: 9600
Data bits: 8 bits
Parity bit: none
Stop bit: 1 bit
− RS485
Baud rate: 9600
Data bits: 8 bits
Parity bit: none
Stop bit: 1 bit