InHand VG710 - 5.4 Services

InHand VG710 InVehicle Gateway User Manual
28
5.4 Services
5.4.1 DHCP (Automatic IP Address Allocation)
DHCP uses the client/server communication mode. The client submits a configuration application to
the server, and the server returns the IP address assigned to the client to realize the dynamic
configuration of the IP address.
The DHCP server and DHCP forwarding function are mutually exclusive.
Method for settings when the gateway is used as a DHCP server:
Click "Services >> DHCP >> DHCP Server". In the "DHCP Server" bar, check "Enable", select an
interface, set the start and end IP addresses, click Add, and then click Apply & Save.