InHand VG710 - Gps

InHand VG710 InVehicle Gateway User Manual
33
5.4.5 GPS
Position: You can view the current positioning information.
Method for enabling GPS for the gateway:
Click "Services >> Enable GPS", check "Enable", and click Apply & Save. By default, GPS is enabled
for the gateway.
Method for forwarding GPS data to the server over IP when VG710 is used as a client:
Click "Services >> GPS IP Forwarding", check "Enable", select "Client" for "Type", enter the server
address and port in the "Destination IP Address" bar, click Add, and then click Apply & Save.