InHand VG710 - Snmp

InHand VG710 InVehicle Gateway User Manual
69
9.7 SNMP
9.7.1 SNMP
Currently, the SNMP Agent of VG710 supports SNMPv1, SNMPv2c, and SNMPv3.
● SNMPv1 and SNMPv2c use community names for authentication.
● SNMPv3 uses user names and passwords for authentication.
Method for enabling SNMP for VG710:
Click "Administration >> SNMP >> SNMP", check "Enable", select "v1c" for "v2c" for "SNMP
Version", and click Apply & Save.
If v3c is selected, the corresponding user and user group need to be configured. Enter any name for
"Groupname", select a security level, and click Add. Enter any name for "Username", select the new
group name for "Groupname", set "Authentication" and "Authentication password", click Add, and
then click Apply & Save.