InHand VG710 - 9.6 Configuration Management

InHand VG710 InVehicle Gateway User Manual
68
and cannot be performed independently over Radius.
● LDAP authorization
Method for enabling authentication and authorization for the gateway:
Click "Administration >> AAA >> AAA Settings". 1, 2, and 3 are corresponding to Radius, Tacacs,
ad LDAP respectively. Authentication entries 1, 2, and 3 must be corresponding to authorization
entries 1, 2, and 3 respectively. When all of radius, tacacs+, and local are set, the priority sequence is
as follows: 1 > 2 > 3.
9.6 Configuration Management
Method for importing configurations: Click "Administration >> Config Management >> Config
Management >> Browse", select a configuration file, and click Import to import the configuration file
to the gateway.
Method for backing up current running configurations to the PC (common): Click Backup
running-config.
Method for backing up the startup file to the PC: Click Backup startup-config.
Method for restoring default configurations: Click Restore default configuration and then click OK.