EasyManua.ls Logo

InHand VG710 - 5.7.3 VRRP Configuration

InHand VG710
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
InHand VG710 InVehicle Gateway User Manual
47
Click "Link Backup >> Track >> Track" and set "Index" as required. "positive-start/negative-stop"
means starting the IPsec service when the track detection state is Positive and stopping the IPsec
service when the track detection state is Negative.
5.7.3 VRRP
Scenario: Multiple gateways are connected to a network at the same time. Gateway A acts as the host,
and gateway B acts as a backup for gateway A. When gateway A fails, gateway B temporarily
replaces gateway A as the host.
1. Networking requirement
Host A uses the VRRP backup group comprising gateway A and gateway B as its default gateway to
access host B on the Internet.
Information of the VRRP backup group:
The backup group ID is 1.
The IP address of the virtual gateway of the backup group is 10.5.16.88.
Gateway A acts as the master gateway.
Gateway A acts as a backup gateway that can be preempted.

Other manuals for InHand VG710

Related product manuals