InHand VG710 - Sms

InHand VG710 InVehicle Gateway User Manual
32
5.4.4 SMS
The short message service (SMS) is enabled for gateway restart and manual dialup via SMS messages.
Some gateways can receive alarm information in the SMS whitelist.
Method for controlling gateway restart and manual dialup via SMS messages
When the cellular selects SMS activation mode, Click "Services >> SMS" and check "Enable". In the
"SMS Access Control" bar, set "ID" as required, select "permit" for "Action", enter the phone number,
and click Apply & Save. When you activate the dialup port via SMS, after the configuration is
completed, you can send the reboot command to restart the gateway by using the mobile phone
number, or send the cellular 1 ppp up/down command to make the gateway redial or interrupt the
dialup.