InHand VG710 InVehicle Gateway User Manual
31
Method for enabling the DDNS service for the gateway:
1. If the Custom service is used, set "Method Name" as required, select "Custom" for "Service Type",
and enter the DDNS expression "http://user
name:password@ddns.oray.com/ph/update?hostname=
host name" of the server for "Url". This
expression is only for reference. The actual URL is provided by the service provider (usually available
on the official website of the service provider). Click Add.
If a common domain name server other than the Custom service is used, set "Method Name" and
"Service Type" as required, enter the user name, password, and host name obtained from the server,
and click Add.
If "Disable" is selected, the DDNS service is not used.
2. Select the gateway interface, enter the name of the DDNS update method, click Add, and then click
Apply & Save to apply the DDNS update method to the gateway interface.
3. Wait several minutes after the DDNS settings are applied and saved. Then ping the host name
(domain name) of the domain name server to confirm the successful application of the DDNS service.
To Next Page
Loading...
