InHand VG710 InVehicle Gateway User Manual
23
3. Set VG710_B in the same way. The virtual and peer IP addresses of VG710_B must correspond to
those of VG710_A, and the key must be the same as that of VG710_A.
5.3.3 L2TP
The Layer 2 Tunneling Protocol (L2TP) is an industrial-standard Internet tunneling protocol used to
encrypt network data streams.
Method for settings when the gateway is used as an L2TP client:
1. Click "VPN >> L2TP >> L2TP Client >> L2TP Class", enter a name of an L2TP class, and click
Add.
2. Configure the pseudowire class: Enter a name of any pseudowire class. "L2TP Class" is the same as
that on the "L2TP Class" page. Set "Source Interface" to the interface connecting to the server. Select
L2TPV2 for "Protocol" and click Add.
To Next Page
Loading...
