InHand VG710 - 5 Network Management; 5.1 Network Settings

InHand VG710 InVehicle Gateway User Manual
11
5 Network Management
In parameter settings, a green text box indicates a mandatory item, and a pure white text
box indicates an optional item.
5.1 Network
5.1.1Bridge Port
A bridge port is intended to connect two different physical LANs over a bridge, to enable storage and
forwarding across LANs at the link layer.
Method for modifying the IP address of a bridge port and bridge members:
1. Click "Network >> Bridge" and select "Bridge >> Modify".
2. Modify the IP address of the bridge port or bridge members. Among the bridge members,
dot11radio1 and dot11radio2 are Wi-Fi 2.4G and Wi-Fi 5G ports respectively.