InHand VG710 - Snmptrap (Alarm)

InHand VG710 InVehicle Gateway User Manual
70
9.7.2 SnmpTrap (Alarm)
The SNMP trap is a type of entrance. When this entrance is reached, the SNMP managed devices
actively notify the NMS, instead of waiting for the polling of NMS. On an SNMP-enabled network,
the agents on managed devices can report errors to the NMS anytime, without the need of waiting for
the polling of NMS. The errors are reported to the NMS through traps.
Method for enabling SnmpTrap for the gateway:
Click "Administration >> NMP >> SnmpTrap". Enter the IP address of the NMS. Enter the
corresponding group name when v1c or v2c is selected, or the corresponding user name when v3c is
selected, ensuring that the name consists of 1–32 characters. By default, the UDP port ID ranges from
1 to 65535.