InHand VG710 - Page 25

InHand VG710 InVehicle Gateway User Manual
20
Encryption
algorithm
AES128
Encryption
algorithm
Authentication
method
SHA1
Authentication
method
IPsec mode Tunnel mode IPsec mode
IPsec tunnel configuration IPsec tunnel configuration
Peer address
Address where gateway B
establishes the IPsec service
Peer address
Address where
gateway A
establishes the IPsec service
Interface
Interface for establishing the
IPsec service
Interface
Interface for establishing the
IPsec service
IKE version IKE version used IKE version
Same as that of gateway A
Authentication
method
Shared key
Authentication
method
Local subnet
IP address of the subnet of
gateway A
Local subnet
IP address of the subnet of
gateway B
Peer subnet
IP address of the subnet of
gateway B
Peer subnet
IP address of the subnet of
gateway A
Detailed configuration steps:
1. Configure gateway A and gateway B.
(1) Add IKE and IPsec policies, and click Apply & Save.
(2) Add IPsec tunnels and click Apply & Save.