page 114 innovaphone IP DECT
192.168.0.10/configs/. In this directory, there is a file update-
ip1200.htm , which processes the following lines:
mod cmd UP1 times /allow 23,0,1,2,3,4 /initial 6
mod cmd UP0 scfg http://192.168.0.10/configs/saved/
#h.txt
mod cmd UP0 prot http://192.168.0.10/configs/04-5679 /
ser 04-5679
mod cmd UP1 check ser 20040330-01
config change PHONECFG0 /coder G729A,60, /lang eng /
protect
config change PHONEAPP0 /f4-10 BellOff /f4-v0 %1BE /f5-
10 BellOn /f5-v0 %1BF
config write
config activate
iresetn
There is also the file update-ip3000.htm, which reads the following two lines:
mod cmd UP1 time /allow 23,0,1,2,3,4
mod cmd UP0 prot http://192.168.0.10/configs/04-5679 /
ser 04-5679
This example demonstrates how the configuration of a device is stored on a Web
server; all IP1200 devices are then instructed to load/update the firware version
04-5679 in the time period 23:00 hrs to 04:59 hrs. New devices are updated after
a restart and after the specified six minutes have elapsed. The devices are
configured so that they use the G729 codec with a frame size of 60ms, the
language setting is English and the configuration is write-protected. Therefore,
only an administrator with appropriate authorisation can change this file. In
addition, two standard functions were programmed for the device.
IP3000 devices are updated to firmware version 04-5679 in the time period
23:00 hrs to 04:59 hrs.
To Next Page
Loading...
