innovaphone IP DECT Page 19
4.1.1.4 Configuration/General/Update
The update server is used for efficient administration of various VoIP devices.
The update server reads a file at intervals from a configurable URL (Uniform
Resource Locator).
Detailed information on the update server and the update script is contained in
Appendix E “
Configuration of the update server
”.
4.1.1.5 Configuration/General/NTP
Through specification of an NTP (Network Time Protocol) server, the VoIP device
is able to synchronise its internal clock with an external time source. This is re-
quired, as without specification of a time server the internal time is reset to 0:00
Command
File URL
An URL, for example http://192.168.0.1/update/
script-ip800.txt, pointing to a file whose commands are
executed.
If the URL ends with a slash (/), for example http://
192.168.0.1/update/, the device is adding the file name
update-ipxxx.htm automatically, deduced from the device
short name (for example update-ip800.htm).
Furthermore the placeholder #h and #m can be used in the
URL-String:
• #h - will be replaced by the device short name (for
example IP800).
• #m - will be replaced by the device mac-adress (for
example 00-90-33-01-02-03).
These placeholders may be used e.g. to address a device-spe-
cific directory (http://192.168.1.2/update/#h/
script.txt) or to generate HTTP-GET parameters (http:/
/192.168.0.1/update/script.php?mac=#m).
If the directory of the file is password-protected, the access
credentials must be specified in the chapter “
Configuration/Ge-
neral/HTTP Client
”.
Interval
[min]
An interval (in minutes) at which the file is re-read and
executed.
To Next Page
Loading...
