page 66 innovaphone IP DECT
4.2.1.5 Administration/PBX/Registration
Over the menu Registrations all registered and unregistered devices are listed:
4.2.1.6 Administration/PBX/Calls
In the Calls PBX overview page, all calls actively being made can be monitored.
This is advantageous for diagnostic purposes in particular, since the existence of
possible network problems, for example, is immediately visible (see Media).
Subscriber A:
Primary
Group
The
Primary Group
list box allows you to define which group
should be the Primary Group, in so far as at least two groups
were created for the Waiting Queue.
If a
Primary Group
is specified, the calls are signalled first to
the subscribers of the
Primary Group
, and are also signalled
to the subscribers of the other group after the Primary time
interval has elapsed.
DTMF |
Dest. No |
Dest.
Name
It is also possible to allow call forwarding using touch-tone
dialling (DTMF).
DTMF = The DTMF character string (for example, 1 or *1#).
Dest. No = The destination number.
Dest. Name = The destination name.
Long
Name
“Long Name” registered in the PBX
No Call number registered in the PBX
Name “Name” registered in the PBX
Display Assigned display
Registra-
tion
The current registration state. Possible states:
subscribing
,
pending
or
IP address
of the VoIP device, with which the user
has registered.
Number Display of the calling number.
Name Display of the calling name.
Protocol Display of the protocol used on the calling side.
To Next Page
Loading...
