innovaphone IP DECT Page 49
4.2.1.1 Administration/PBX/General
The innovaphone PBX can be administered here.
PBX Mode The PBX mode
Off, Master
,
Slave
or
Standby
.
1. Off - The PBX is disabled.
2.
Master
- Operates the PBX on this device as the mas-
ter. Where several PBXs are operated in combination,
there must be one PBX configured as the master.
3.
Slave
- Operates the PBX on this device as the slave. A
slave must register with a master.
4.
Standby
- Standby PBX for the master. Monitors the
functioning of the master and becomes active (as the
master) if the master PBX is no longer available.
System Name The system name. For H.323 terminals, this is the gate-
keeper identifier.
PBX Name The PBX name. If several devices are operated in combi-
nation, every device with a PBX component must be allo-
cated a unique name. This name is also used for
identification when a slave registers with a master.
Unknown Regi-
strations
A checked check box allows unknown registrations.
These are terminals that have no gatekeeper ID alloca-
ted and try to register with a gateway via the Gatekeeper
Discovery.
Music On Hold
URL
If a valid path (URL) to a music on hold file is specified
here, then it is played as soon as a call is
put on hold
.
The URL can be specified in the following format:
http://192.168.0.1/webdav/
moh.$coder?coder=g729,g711a&repeat=true
The specification of the wildcard
.$coder?coder=g729,g711a in place of the file
extension .g729 enables several formats to be specified.
They must be specified separated by a comma and must
be available on the Web server. With the addition
&repeat=true, an automatic repeat can be enabled.
External Music
On Hold
For load balancing purposes, the music on hold can be
read from a different device. This device can register
with the name configured here. If no name is configured,
the music on hold of the local device is read.
To Next Page
Loading...
