page 50 innovaphone IP DECT
If the PBX is operated in Slave mode, then the Slave PBX section is displayed:
If the PBX is operated in Standby mode, then the Standby PBX section is dis-
played:
The Licences section provides you with a brief overview of the available PBX
licences and those that have already been allocated:
CFNR Timer Global timeout (in seconds) for a call diversion when
there is no response, unless configured differently for the
respective user.
No. of Regs w/o
Pwd
Number of possible registrations without a password
entry.
Recall Timer Time, after which the call is sent back to the switching
user following a failed switching attempt (recall). If no
value is configured, no recall is made.
Pickup Prefix The prefix that is to apply to the pickup group.
Enable External
Transfer
A checked check box enables external call switching.
Route External
Calls to
Here, you specify the long name of the PBX object of the
PBX
type, to which external calls are to be routed.
Master The IP address of the PBX master.
Alternate Master The IP address of an alternative PBX master (standby), if
available.
Password The password of the PBX master (slave), if configured.
Master The IP address of the PBX master.
Registrations Registration licences.
Operators Operator licences.
SoftwarePhones SoftwarePhone licences.
PBX6#
n
PBX basic licences.
PBX6#
m@n
PBX basic licence upgrades.
To Next Page
Loading...
