Innovaphone IP6000 - Administration;Gateway;Cdr0-1

page 88 innovaphone IP DECT
4.2.2.5 Administration/Gateway/CDR0-1
The transmission of the so-called CDRs (Call Detail Records) is disabled as
standard (Off). After selection of a CDR type, the transmission of detailed CDRs
is enabled, as are the relevant entry fields. To prevent data loss in the event of
failure of the first CDR server (CDR0), it is possible to specify a second CDR
server (CDR1).
Name In The calling name. The CGPN map is valid if the inbound H.323
call name matches the name set here.
Number
Out
Here, you enter the call number or dial prefix to be replaced
for the switching.
Off CDR is disabled.
TCP The device transmits the CDR entries via a TCP connection.
•In the Address field, you enter the IP address at which
the TCP connection is to be set up.
•In the Port field, you specify the port to which the connec-
tion is set up.
SYSLOG The CDR entries are transmitted to a syslog recipient (also re-
ferred to as syslogd, syslog server
or syslog daemon
), which is then responsible for their further evaluation or stora-
ge.
•In the Address field, you enter the IP address of the
syslogd
server.
•In the Class field, you enter the desired message class
that will be responsible for further processing of the CDR
entries.