Innovaphone IP6000 - Protected areas; Saving the settings

innovaphone IP DECT Page 15
3.2 Protected areas
Apart from the start page, all areas of the device are password-protected. When
shipped from the factory, the innovaphone VoIP device has:
• The standard user name admin and
• The standard user password ipxxx (ipxxx stands for the device type, for
example, ip800, ip1200, etc.).
3.3 Saving the settings
The setting are saved in the respective submenu always using the OK button.
• Some changes to settings require a device restart to become effective. In
this case, reset required is shown in the respective menu. More detailed
information on restarting the device is contained in the chapter entitled
“ Administration/Reset ”.
Caution
To raise the security of the VoIP device, the standard user and the standard
password should always be changed (see chapter entitled “ Configuration/
General/Admin ”)!