innovaphone IP DECT Page 61
The following specifications are made in the MWI section:
4.2.1.4.10 Number Map Object:
The
Number Map
PBX object allows you to store abbreviated dialling numbers in
the PBX. For example, you can define the abbreviated dialling number #1 (Num-
ber = #1) for the local police station (07031-110). When using several locations,
this can have undesired side-effects however, since a subscriber of a different lo-
cation (B) would always call the police station of the one location (A) with this
abbreviated dialling number. Therefore, when defining a Number Map, the IP
address range with network mask must always be specified.
The following specifications are made in the MAP section:
4.2.1.4.11 PBX Object:
If several locations are used, it is essential that a PBX object of the
PBX
type be
created for each one. The name (Name) of this object is also the node descrip-
tion. The call number (Number) represents the prefix of the location. If a PBX
object was defined, the menu set-up for the objects is extended through the ad-
dition of the
Node
,
PBX
and
Local
entry fields.
Announce-
ment URL
The path of the audio file to be played.
External
Name/No
After the audio file has played, the call can be forwarded to a
different subscriber or call number.
Address The IP address range that is authorised to use this Number
Map. To allow all subscribers to use this Number Map, you
can leave this field empty.
Mask If all subscribers are to be permitted to use this Number Map,
you must enter the subnet mask 0.0.0.0; otherwise, you
enter the relevant network mask of the authorised IP address
range.
Dest. No The destination number with which this Number Map is to be
linked.
To Next Page
Loading...
