page 96 innovaphone IP DECT
4.2.6.1 Administration/Idle Reset
With an Idle Reset, the VoIP device is reset as soon as no more active calls are
being carried out.
4.2.6.2 Administration/Reset/Reset
With a normal Reset, the device is immediately reset. All active calls are lost.
4.2.6.3 Administration/Reset/TFTP
With a TFTP Reset, the VoIP device is transferred to TFTP mode. In this mode,
the device can only be accessed with the GWLoad tool and thus allocated an IP
address. Further information on the innovaphone GWLoad tool may be found in
the innovaphone Knowledgebase.