Innovaphone IP6000 - Administration;Diagnostics;Tracing

innovaphone IP DECT Page 93
Clicking OK saves the settings made.
4.2.5.2 Administration/Diagnostics/Tracing
Using the trace (buffer) link, the trace information of the VoIP device can be
viewed and saved. In the process, a text file log.txt is generated, which displays
the current trace in a new browser window.
Using the trace (continuous) link, the continuous trace information of the de-
vice can be viewed and saved. In the process, a text file c
log.txt is generated,
which displays the current trace in a new browser window. As already mentio-
ned, the messages are continuously automatically updated and are scrolled up-
wards, out of the window.
For both trace variants, only messages that were enabled in this menu are dis-
played. Not every section and not every setting is visible; this will depend on
which device is being used.
DECT section:
Interfaces section:
PPP All PPP connections – only visible for devices with PPP inter-
face.
BRI1-n All BRI1-n connections – only visible for devices with BRI
interface.
PRI1-n All PRI1-n connections – only visible for devices with PRI
interface.
System Information on the DECT system.
Master Information on the DECT master.
Radio Information on the DECT radio.
PPP Information on the PPP interface.
TEL1-n Information on the TEL1-n interface.
BRI1-n Information on the BRI1-n interface.
PRI1-n Information on the PRI1-n interface.
prot The prot check boxes after the individual interface settings
give information on the protocol used.