page 22 innovaphone IP DECT
TCP The device transmits the syslog entries using a TCP (Trans-mis-
sion Control Protocol) connection.
•In the Address field, the IP address at which the TCP con-
nection is to be set up is entered.
•In the Port field, the port to which the connection is set
up is specified.
SYSLOG The syslog entries are transmitted to a syslog recipient (also re-
ferred to as syslogd, syslog server
or
syslog daemon
), which is then responsible for their further evaluation or stora-
ge.
•In the Address field, the IP address of the syslogd
ser-
ver is entered.
•In the Class field, the desired message class that will be
responsible for further processing of the syslog entries is
entered. The syslog class is a numeric value between 0
and 7.
HTTP The syslog entries are transferred to a Web server, where they
can be further processed. Each individual syslog entry is trans-
ferred as form data to the Web server in HTTP GET format.
•In the Address field, the IP address of the Web server
that carries out further processing of the transmitted data
is entered.
•In the Path field, the relative URL of the form program on
the Web server is entered.
The device will make a HTTP GET request to the Web ser-
ver on the entered URL, followed by the URL-encoded sys-
log entry. If, for example, a page named /cdr/
cdrwrite.asp with a form that expects the log message
in parameter msg
exists on a Web server, then the value /
cdr/cdrwrite.asp is entered. The device will then
make a GET
/cdr/cdr-write.asp?event=sys-
log&msg=logmsg request to the Web server.
To Next Page
Loading...
