innovaphone IP DECT Page 37
Enblock
Dialling
Timeout [s]
*
Switches on enbloc dialling for VoIP telephones.
Faststart
[0|1] *
With the Faststart[0|1] setting, you can turn on/off the
H.323 Faststart procedure.
Tunneling
[0|1] *
With the Tunneling[0|1] setting, you can turn on/off the
H.245 Tunneling procedure.
Language * All VoIP telephones that receive their IP address via DHCP
have the language defined here set up as the standard lan-
guage.
Dialling
Location *
Defines the various PBX access numbers on VoIP telephoness
for directory access. This character string must contain /cc, /
ac, /ntp, /itp, /col and /pbx options. Such a character string
may look like this: “
/cc 49 /ac 7031 /ntp 0 /itp 00 /col 0 /pbx
7
”.
AM/PM
Clock [0|1]
Enables/disables the English time format for VoIP telephones.
The German time format is displayed as standard: “
dd.mm.yy
hh:mm, 24-hour clock.”
If a 1 is entered in this field, the English time format “
mm/dd
hh:mm xm, 12-hour am/pm clock”
is displayed.
LDAP Direc-
tory
To allocate a functioning LDAP configuration to all VoIP
devices integrated via DHCP, a configuration character string
can be entered in the LDAP Directory field. You obtain this
configuration character string by executing the following com-
mand in the browser of a configured device:
“<IP address of
the VoIP device>/!mod cmd PHONEDIR0 ldap-config”
. When
this command has been executed, a configuration character
string is output in the browser, which you copy and paste into
the LDAP Directory field of the DHCP server. In this way, all
further devices are given a correct LDAP configuration.
Update
Interval
[min]
All devices integrated via DHCP are assigned the interval spe-
cified here in the Interval [min] field of the update server
(see chapter entitled “Configuration/General/Update”).
To Next Page
Loading...
