1.1.3 During wiring:
Caution
Do not drop the lead wire stub or screw in the inverter. Otherwise it may
damage the inverter.
Please install the driver in the place where there is no direct sunlight or no
vibratory.
When more than two inverters are to be installed in one cabinet, due attention
shall be paid to the installation locations (refer to Chapter 3 Mechanical and
Electrical Installation) to ensure the heat sinking effect.
Danger
Operation shall be performed by the professional engineering technician.
Otherwise there will be danger of electric shock!
There shall be circuit breaker between the inverter and power supply.
Otherwise, there may be re!
Make sure the power is disconnected prior to the connection. Otherwise
there will be danger of electric shock!
The earth terminal shall be earthed reliably. Otherwise there may be danger
of electric shock.
Danger
Operation shall be performed by the professional engineering technician.
Otherwise there will be danger of electric shock!
There shall be circuit breaker between the inverter and power supply.
Otherwise, there may be re!
Make sure the power is disconnected prior to the connection. Otherwise
there will be danger of electric shock!
The earth terminal shall be earthed reliably. Otherwise there may be danger
of electric shock.
To Next Page
Loading...
