Parameter addr. Parameter description
1000 Communication setup value(-10000 to 10000)( Decimal)
1001 Running frequency
1002 Bus voltage
1003 Output voltage
1004 Output voltage
1005 Output power
1006 Output torque
1007 Running speed
1008 DI input ag
1009 DO output ag
100A AI1 voltage
100B AI2 voltage
100C AI3 voltage
100D Counting value input
100E Length value input
100F Load speed
1010 PID setup
1011 PID feedback
1012 PLC process
1013
Caution:
Communication setting value is the percentage of relative value, and 10,000 correspond to
100.00%, -10000 correspond to -100.00%.
On the frequency dimension of the data, the percentage is the percentage of relative maximum
frequency (F0-10). To the torque dimension data, the percentage is relative twice percentage of
the inverter rated torque.
Control command input to inverter (write-only)
To Next Page
Loading...
