Integra MEDIAJET - Page 27

MEDIAJET – Operating instructions V09 Operation
27
www.integra-biosciences.com
4.2.1 Language selection
 Press >>> in order to reach the second page of the MAIN MENU.
 Select a language under SYSTEM PARAMETER / LANGUAGE
SELECTION.
4.2.2 Dish sensor teach-in (teach-in sensors only)
The dish sensor teach-in is a procedure to adjust the optical sensor to the used
type of Petri dishes. Whenever the type of Petri dishes is replaced (different
brand or size) the teach-in procedure should be carried out.
 Select DISH SENSOR TEACH-IN under SYSTEM PARAMETER.
4.2.3 Biplate (optional)
This function supports the adjustment of the filling nozzle holder for dispensing
into two-compartment Petri dishes and tests the automatic alignment of the
dividing wall of the dishes. Before you perform a biplate filling program, follow
this procedure:
 Select PROGRAM CONFIGURATION under SYSTEM PARAMETER and
enable the biplate alignment.
 Press SAVE.
 The screen will appear in the language
selected.
 Follow the instructions on the screen. Press
START and later CONTINUE.
 If “Teach-in successful” is displayed press
END.
 Select BIPLATE under SYSTEM
PARAMETER.
 Initialise the rotor by pressing INIT ROTOR.