Integra MEDIAJET - Configuration Specifications

MEDIAJET – Operating instructions V09 Technical data
56 INTEGRA Biosciences AG
6.3 Configuration specifications
The table below shows all available MEDIAJET configurations listing the
corresponding accessories compatible with the different Petri dish sizes
specified above. A detailed overview of all the listed parts is shown in “7.2
Accessories for different Petri dish sizes” on page 58.
Special configurations for other Petri dish formats are available on request.
MEDIAJET
configura-
tion
MEDIAJET
base units
version
Rotor
Part No.
Carousel
Part No.
Conversion set
Part No.
Compatible
accessories
Part No.
Tubing set 103 030 Tubing set 113 030 Tubing set 103 040 Tubefiller 103 010
90 (standard) standard 103 271 103 020 or
103 021
not applicable x x x
vario 113 051 x x x
90S standard 103 272 103 020 or
103 021
not applicable x x x
vario 113 051 x x x
90L vario 113 460 113 022 or
113 023
113 055 x x x
90 (biplate) vario 113 806 103 020 or
103 021
113 051 x x x
60 (standard) vario 113 271 113 020 113 052 x x
60S vario 113 276 113 020 113 056 x x
35 (standard) vario 113 272 113 021 113 053 x x