MEDIAJET – Operating instructions V09 Optional functions and required accessories
58 INTEGRA Biosciences AG
7 Optional functions and required accessories
There are a number of accessories and optional functions that adapt the
MEDIAJET to particular application requirements.
Purpose This chapter describes the general accessories and the available optional
functions as tube filler, imprinting on dishes, independent pump function or how
to drive a second pump.
7.1 General accessories
7.2 Accessories for different Petri dish sizes
In its standard configuration, MEDIAJET (Part No. 103 005 and 103 006) is
delivered with a standard Rotor for Ø 90 mm Petri dishes and the corresponding
tubing set.
The MEDIAJET vario base units (Part No. 113 000, 113 001 and 113 002) are
convertible for various Petri dish sizes. One of the following conversion sets,
carousels and rotors must be added.
Accessories Part No.
Communication interface cable MEDIAJET to
MEDIACLAVE, for process documentation on
MEDIACLAVE printer.
103 046
UV lamp TUV11W to reduce the risk of
contamination during the filling process.
103 705
Pumphead 313D 103 520
To Next Page
Loading...
