MEDIAJET – Operating instructions V09 Maintenance
52 INTEGRA Biosciences AG
5.4 Servicing
We recommend that you have the MEDIAJET serviced once per year.
Servicing work and repairs must only be carried out by experts using original
replacement parts. For any service or repairs, please contact your local service
technician.
If the surface of the MEDIAJET has been in contact with biohazardous material,
it must be decontaminated in accordance to good laboratory practice. Do not
spray directly on the instrument but use a lint-free cloth, lightly soaked with a
disinfectant and wipe dry directly after decontamination. Never use acetone or
other solvents! Follow the instructions provided by the disinfectant
manufacturer.
5.5 Fault notifications
In the event of a fault an acoustic alarm sounds.
Switch off the active alarm tone by pressing the sign.
Now read the alarm text on the display and follow the instructions.
When the fault has been removed you can continue working.
ASSISTANCE
If the MEDIAJET is one year in operation since the last service, a service
reminder is displayed in the MAIN MENU and stored in SYSTEM
PARAMETER - SYSTEM MESSAGES, where it can be re-displayed.
WARNING
MEDIAJET needs to be cleaned before sending it to service and the
declaration on the absence of health hazards must be signed. This is
necessary to protect service personnel.
ASSISTANCE
There are various fault codes for quick and easy fault diagnosis. Some of them
are of relevance to you as user.
In case a TECHNICAL ERROR is displayed by MEDIAJET please contact the
local customer service department.
To Next Page
Loading...
