Intel Express 460T User Manual

68
CHAPTER 5 Intel Express 460T Standalone Switch Users Guide
Configure Static MAC Addresses
Description
Static MAC addresses remain in the switch’s address table, whether or not
the device is physically connected to the switch. After you define a static
MAC address, it remains in the switch’s address table until you remove it.
Enter MAC: Type the MAC address you want to add to the address table.
VLAN or VLAN ID: When VLANs are active on the switch you can define
static MAC addresses for each VLAN. If port-based VLANs are active
press the z to select a VLAN. If tag-based VLANs are active type
the VLAN ID that the static MAC address will be assigned to.
Select Port: Use the z to select a port on the switch where the
switch forwards traffic.
ADD/DELETE: Adds or removes a MAC address from the switch’s table.
LOCATION
Main Menu
Configure Device
Forwarding and Filtering
Static MAC Addresses
NOTE
If tag-based or port-based VLANs
are currently running, you must
assign each static MAC address to
a specific VLAN.

Intel Express 460T Specifications

General

Brand	Intel
Model	Express 460T
Category	Switch
Language	English