Intel® Server Board M10JNP2SB User Guide
10
1. Introduction
This user guide provides a high level overview of the features, functions, and architecture of the Intel® Server
Board M10JNP2SB. This document replaces the document previously known as the Technical Product
Specification (TPS).
This guide is divided in two main parts going from chapters 2 to 8 providing information about the server
board features and functions, followed by instructions on how to install or service essential system
components on chapter 9.
For additional information about this server board, refer to the documents listed in Appendix D.
1.1 Intel Server Board Use Disclaimer
Intel Corporation server boards support add-in peripherals and contain a number of high-density VLSI and
power delivery components that need adequate airflow to cool. It is the responsibility of the system
integrator to consult vendor datasheets and operating parameters to determine the amount of airflow
required for a specific system configuration and operating environment. Intel Corporation cannot be held
responsible if components fail or the server board does not operate correctly when used outside any of its
published operating or non-operating limits.
To Next Page
Loading...
