Intel M10JNP2SB - 2 Server Board Overview; Server Board Features Overview; Figure 1. Intel Server Board M10 JNP2 SB; Table 1. Intel Server Board M10 JNP2 SB Features;Specifications

Intel® Server Board M10JNP2SB User Guide
11
2. Server Board Overview
The Intel® Server Board M10JNP2SB is a monolithic printed circuit board assembly with features for data
center and office environments running multiple applications under a continuous work load. This server
board is designed to support the Intel® Xeon® E 2200 processor family.
Figure 1. Intel® Server Board M10JNP2SB
2.1 Server Board Features Overview
Table 1. Intel® Server Board M10JNP2SB features/specifications
Feature
Description
Processor support
• One LGA1151 processor socket
• Supports one of the following processors:
o Intel® Xeon E-2224 processor
o Intel® Xeon E-2236 processor
o Intel® Xeon E-2278G processor
• Maximum supported Thermal Design Power (TDP) of up to 95 W
Note: Server Systems based on this server board may support a lower maximum Thermal
Design Power (TDP). Consult chassis vendor specifications for maximum supported processor
TDP limits.
Memory
• Four DIMM Slots
• Two memory channels
• DDR4 UDIMM ECC, 2666 MT/s, 1.2V
• Up to 128GB total installed memory
Chipset
Intel® C246 Chipset
Network Ports
• Four 1GbE Base-T, RJ45
• One dedicated management port, RJ45
Onboard Storage Support
• Six SATA 6 Gbps ports (6 Gb/s, 3 Gb/s and 1.5 Gb/s transfer rates are supported)
• Two 7-pin SATA-DOM connectors