Intel® Server Board M10JNP2SB User Guide
27
6. Server Management
The Intel® Server Board M10JNP2SB includes an ASPEED* AST2500 Baseboard Management Controller
(BMC) that is IPMI 2.0 compliant, providing several management features that enable support for the
following:
• Control system functions – power system, ACPI, system reset control, system initialization, front panel
control, and system event log.
• Monitor various board and system sensors and regulate platform thermals and performance to
maintain (when possible) server functionality in the event of component failure and/or
environmentally stressed conditions.
• Monitor and report system health.
The integrated BMC supports the following features:
• Sensor monitoring
• In-Circuit BMC firmware update
• Chassis intrusion detection
• FRU information
• Logging and reporting
• Remote control
• Image redirection
• Power control
• Chassis identify
• Front panel control
• Configuration backup
• External user services
• Platform event filtering
• SMTP messaging
• Video recording
• User management
• Embedded firewall
6.1 Shared Management Interface
The Intel® Server Board M10JNP2SB provides a shared management interface that can be used to route
management traffic through ethernet port #4 on the back edge of the server board. This feature is disabled
by default and can be enabled using the <F2> BIOS Setup Utility. Refer to the Intel® Server Board
M10JNP2SB BIOS Setup Guide for more details.
6.2 Embedded Web Server
BMC manageability provides an embedded web server which exposes the management features of the BMC.
It is supported through the dedicated management port on the back edge of the server board or the shared
management interface (when enabled and configured). The embedded web user interface supports the
following client web browsers:
• Microsoft Internet Explorer*
• Mozilla Firefox*
• Google Chrome*
• Safari*
To Next Page
Loading...
