Intel M10JNP2SB - Onboard Storage Connectors; SATA 6 Gbps Connectors; SATADOM 6 Gbps Connectors; SATA SGPIO Connector

Intel® Server Board M10JNP2SB User Guide
30
7.2 Onboard Storage Connectors
This section contains a functional overview and pin-out of each connector that the server board provides in
support of several storage options.
7.2.1 SATA 6 Gbps Connectors
The server board includes six blue 7-pin SATA connectors capable of transfer rates of up to 6 Gbps. Table
10 provides the pin-out for all six connectors.
Table 10. SATA connector pin-out
Pin
Signal
1
GND
2
TXP
3
TXN
4
GND
5
RXN
6
RXP
7
GND
7.2.2 SATADOM 6 Gbps Connectors
The server board includes two white 9-pin SATADOM connectors capable of transfer rates of up to 6Gbps.
Table 11 provides the pin-out for both connectors:
Table 11. SATADOM connector pin-out
PIN
Signal
1
GND
2
TXP
3
TXN
4
GND
5
RXN
6
RXP
7
GND
P1
VCC 5V
P2
GND
7.2.3 SATA SGPIO Connector
The server board includes a 10-pin SGPIO for storage sideband communications. Table 12 provides the
pinout for the connector:
Table 12. SGPIO connector pin-out
Signal
Pin
Pin
Signal
SCL
1
2
SD1/SDO1
SDA
3
4
SDO0
GND
5
6
SLOAD
KEY
7
8
SCLOCK
V3AUX
9
10
HDD_FAULT