Intel SC5300 - Connect Cables to Server Board; Figure 35. Securing Cables in Chassis with a Hot Swap Power Supply

Setting Up the Chassis
26 Intel® Server Chassis SC5300 User Guide
Connect Cables to Server Board
1. See your Intel® Server Board User Guide or Quick Start User’s Guide for cable connection
locations.
✏
NOTE
Use caution in routing cables to ensure that cables do not obstruct airflow
from the fans.
2. If your server has a hot swap power supply, secure the cables (that route toward the server board)
to the chassis using the tie wrap that came in the supply bag that shipped with your chassis.
Figure 35. Securing Cables in Chassis with a Hot Swap Power Supply