Intellian v45C - Page 82

82
v45C - Maritime VSAT Antenna System
No. Item Description
3
Network Service
Conguration
Sets the network service conguration
• Telnet Service: sets the telnet service (Disable / Enable).
• HTTPS Port: sets the HTTPS port number.
• SSH Service: sets the SSH service status (Disable / Enable).
Click the Apply button to apply the settings to the system.
4
Sys Log
Conguration
Sets the system log conguration. Antenna sends log messages according
to the emergency level. Enabling this function sends the message to your
management server.
• Management Server: sets the management server status (No / Yes).
• Server IP: sets the management server IP address.
• UDP Port: sets the management port.
• Message Type: selects message type (Intellian message level) to send to the
management server (Lower number indicates higher emergency).
• Syslog Target Level: if you select this target level, the management server
receives a log message equal to or less than this level.
Click the Apply button to apply the settings to the system.
5
Radius
Conguration
This menu is used when the network administrator needs to authorize user
connections using Radius server.
• Client: sets the Radius authentication (Disable / Enable).
• Server IP: sets the Radius server IP Address.
• Timeout: sets the Timeout value in seconds for the authentication process.
• Server Secret: sets the Pass-Phase. This should be matched between server
and ACU.
Click the Apply button to apply the settings to the system.