Intellian v45C - 9.10.6 SNMP Setting

86
v45C - Maritime VSAT Antenna System
9.10.6 SNMP Setting
1
2
No. Item Description
1
SNMP Setting Sets SNMP conguration.
2
SNMP Agent
Conguration
Sets the SNMP conguration.
• SNMP V1/V2 Status: Choose the SNMP mode.
• V1/V2 Community Name: Enter the SNMP V2 community name.
• V3 Authentication Type: Enter the SNMP V3 authentication mode.
• V3 Authentication Encoding: Choose the SNMP V3 authentication encoding.
• V3 Username: Enter the V3 username of the SNMP Agent.
• V3 Password: Set the V3 password of the SNMP agent. The password must
be at least eight character long.
• V3 Private Encoding: Choose the SNMP V3 private encoding.
• V3 Private Password: Set the V3 private password. The password is must be
at least eight character long.
• TRAP IP/Port: Enter the TRAP IP/Port.
• TRAP Parameter: Enter the SNMP trap specic parameter.
Click the Apply button to apply the settings to the system. Then perform the
"8.8.3 iARM Save & Reboot" on page 69.