Intercomp LP600 - Page 19

LP600 Users Manual
Rev E, February 2017
Page 19 of 43
5. When finished, you may clear the accumulated total weight by pressing and holding
the ZERO button until the display show “.“. The display will clear the
accumulated total and the number of accumulations.
Note: The scale will not accumulate when the weight is negative, zero, or if the
weight is in motion. A display message “.” with error icon will be displayed
if any of those conditions are present. After a successful accumulation the scale
must return to zero before you accumulate the next weight. If you attempt to
accumulate the next weight before allowing the scale to return to zero, a display
message “.” with error icon will be displayed.